A lot of people criticize NetApp for not moving with the times. Some of the newer start-ups like to claim that NetApp is a legacy company not in touch with today’s marketplace. Yet we all know the company has a rich and deep heritage which spans nearly a quarter of a century with over 20 of those years spent on the NASDAQ; so they must be doing something right.
They also like to say NetApp are not in touch with today’s data centre requirements. I would question that. Today NetApp launches the start of a whole new line for the FAS and All Flash FAS side of the portfolio. They have announced three new FAS models: the FAS2600, the FAS8200, and the FAS9000. And on the all-flash side, another two new models. These systems are designed with the data centre of the future in mind, and these enterprise products again deliver an industry first (NetApp were the first to support 15.3TB SSD drives), with next-generation networking in the form of 40Gbe and 32GB FC.
The FAS9000 is the new flagship of the line, and introduces a new modular design similar to what we have seen Cisco adopt to great success in the UCS line. This system has 10 PCI slots per controller which, when combined with the ability of either of the next-gen networking previously mentioned, gives HUGE amounts of bandwidth to either flash and NL-SAS drives. It also has a dedicated slot for NVMe SSD to help with read caching (aka Flash Cache) for those workloads that benefit from a read boost, and has the ability to swap out the NVRAM and controller modules separately, which is to allow for expansion upgrades in the years to come. Here are some of the numbers associated with the FAS9000: it can scale up to 14 PB (Petabytes) per high availability pair (HA pair) or up to 172PB for a 24 node (12 HA pairs) in a NAS environment. Yes, that’s up to 172PB of flash storage managed as a single entity!!
They also announced the arrival of the FAS8200, the new workhorse for enterprise workloads, delivering six 9s or greater of availability. It carries 256GB of RAM—that’s equivalent to today’s FAS8080, or 4x of what’s found in a FSA8040—with 1TB of NVMe M.2 Flash Cache as standard (which frees up a PCIe slot) and can scale to 48TB of flash per HA pair when combined with Flash Pool technology. The FAS8200 also has 4x UTA2 and 2x 10T ports on board. This system is ready to go, and if you need to add 40Gbe or 32Gb FC, this chassis will support the addition of those via cards. This 3U chassis will support up to 4.8PB and can scale out to 57PB, meeting any multi-protocol or multi-application workload requirements.
Another new member to the FAS family is the FAS2600, which replaces the ever popular FAS2500 series. For this market space, disk and controllers contained within the same chassis are prevalent, and the trend that started with the original FAS2000 (maybe even the good ole StoreVault) is still here today, with the FAS2600 offering similar options as the FAS2500 but now with SAS3 support. We have the FAS2620, which supports large form factor drives, whilst the FAS2650 supports the smaller variants. Something that is new to the FAS2000 series is the inclusion of Flash Cache, and the FAS2600 has received the gift of NVMe with 1TB standard per HA pair. Also, changes to the networking have been made. No longer do we have dedicated Gbe ports. Instead, they have change them to 10Gbe, which are for cluster interconnects, scaling up to 8 nodes in this range, and can now use all 4 UTA2 ports for data connectivity. And if you still require 1Gbe, it can be achieved via SFPs for these UTA2 ports (X6567-R6 for optical and X6568-R6 for RJ45).
NetApp, a company that, for some, may not be known for its flash portfolio, yet has sold north of 575PB of the stuff, have also announced two new controllers for the All-Flash Array (AFA) space; the A300 and the A700. These systems are designed purely for flash media, and it shows with the A300 supporting 256GB of RAM whilst the A700 runs with a terabyte of RAM (1024GB)! This huge jump will allow for a lot more processing from the 40Gb and 32Gb networks whilst still delivering microsecond response times. For this ultra-low latency, we are looking at either products like the Brocade X6 director for FC or Cisco’s 3132Q-V for Ethernet to meet these ever-increasing demands.
These new systems will support the world’s number one storage OS: ONTAP version 9.1 and beyond, with this new release also announced today. ONTAP 9.1 in itself has some improvements over the previous versions. We have seen some major boosts to performance, especially in the SME space with the FAS2600 gaining a 200% performance improvement over the previous generation with the FAS8200, and with the FAS9000, about 50% better than their predecessor. The new stellar performer in AFA space is the A700. This new AFA has been reported to handle practically double the workload of an AFF8080 running an Oracle database which is another huge leap in performance.
There are a couple of other nice new features in ONTAP 9.1 which I will mention here, but won’t go into too much detail on. The first would be FlexGroups, which is a single namespace spanning multiple controllers scaling all the way to 20PB or 400 billion files (think infinite volumes but done a lot better). Then there’s cloud tiering: the ability of an AFA to utilise an S3 object store for its cold data—now that’s H. O. T. HOT! ONTAP 9.1 also brings us volume-level encryption, which will work with any type of drive and only encrypt the data that needs it. The Data Fabric also gets an upgrade, with the inclusion of ONTAP Cloud for Azure, which has been a while behind the cloud version for AWS but is worth the wait. And finally we also get the ability with the Enterprise products running ONTAP 9.1 to scale to 12 nodes within a single SAN cluster(that’s the ability to add another 4 nodes).
On another note, NetApp did launch another new box just a couple of weeks ago; the new E2800 sporting the SANtricity OS 8.30, also available in AFA variants and delivering over 300,000 IOPS in a box designed for small and mid-sized businesses. Which like the SolidFire side of the portfolio should not be over looked if it meets all of your desired requirements.
So come gather round people, writers and critics alike. Take a good look. I think we can safely say, that NetApp is a keeping, itself in the game and delivering platforms that go beyond tomorrow’s requirements.
But the big question everyone wants to know is, “What does it look like?” For the answer to that, you should be at NetApp Insight!